Floor Deck Roll Forming Machine
Factory-direct floor deck roll forming lines from our Xiamen production base, built to your deck drawing: rib depth, pitch, cover width, embossing and cut lengths. Send the drawing and we confirm the line configuration and quotation.
Quick answerThe Halcyon floor deck roll forming machine makes composite steel floor deck for concrete slabs, built to your deck drawing: rib depth, pitch, cover width, embossing and cut lengths. Each line is test-run with your coil before shipment. Lead time: 30–60 days for standard machines, 60–120 days for automatic lines, FOB Xiamen, China. Manufactured in our Xiamen factory · 35+ years.
Price range: floor deck roll forming machines
US$49,000–72,000 (standard) · US$78,000–130,000 (premium), FOB China
Standard covers the first two configuration levels (single-profile and multi-profile / quick-change); premium covers fully automatic lines.
Final price depends on profile, thickness, speed, punching and automation. Excludes freight, import duties and installation. Send your profile drawing for a quotation within 24 hours. North American configurations (480V/60Hz, UL and local requirements) are quoted separately.
Large complete lines (e.g. truck chassis beam lines or full cable tray lines) are quoted per project, typically above US$150,000.
Manufactured in our Xiamen factory · 35+ years of roll forming experience.
| Lead time | standard machines 30–60 days; automatic and heavy-duty lines 60–120 days (confirmed in the quotation). |
|---|---|
| Warranty | 12 months on the machine, lifetime technical support by video and remote guidance; wear parts excluded. |
| Payment | 30% deposit; 70% before shipment, after you approve the trial-run video. |
| Where it is made | Manufactured in our Xiamen factory · 35+ years of roll forming experience. |
| How to get a quote | Send your profile drawing or a photo; we reply with the configuration and price within 24 hours. |
Profiles this machine can make
Illustrative sections. Your machine is configured to your own profile drawing.
Factory photoOpen-rib composite floor deck
- Size
- Reference line: 620 mm cover from 1000 mm coil, 0.8–1.2 mm galvanized; other decks to your drawing
- Use
- Composite concrete floors in steel buildings
- Changeover
- One profile per roll set; a second profile needs its own roll set or a double-layer machine.
Re-entrant (dovetail) deck
- Size
- To your drawing
- Use
- Thin composite slabs, ceiling hanger slots
- Changeover
- One profile per roll set; a second profile needs its own roll set or a double-layer machine.
Non-composite deck / permanent formwork
- Size
- To your drawing
- Use
- Formwork only, no composite action
- Changeover
- See the non-composite floor deck machine. See machine →
Get a quote for this machine
Send your profile drawing or a photo of the profile. We reply within 24 hours with a configuration and price.
Commercial terms
- Lead time
- standard machines 30–60 days; automatic and heavy-duty lines 60–120 days (confirmed in the quotation).
- Warranty
- 12 months on the machine, lifetime technical support by video and remote guidance; wear parts excluded.
- Payment
- 30% deposit; 70% before shipment, after you approve the trial-run video.
- Shipping
- FOB Xiamen, China.
Direct answer: choose the line from the deck section
Compare floor deck roll forming equipment against the same approved drawing, steel grade, thickness range, coil width, finished length and target output. Rib geometry, edge overlap and effective cover width define the product to form. Embossing, punching, cut-off and stacking are included only when required by the drawing and confirmed in the quoted configuration.
Floor deck sheet or structural floor member?
This page covers a roll-forming line for ribbed metal deck sheets, including the sheet geometry and installed cover width specified for a floor-decking system. If your drawing instead shows a narrow structural floor framing member with service holes and fixing tabs, compare the HLG-300 structural floor framing machine. The two applications need different profile drawings, tooling reviews and trial-sample checks; the HLG-300 catalogue width must not be treated as a deck-sheet cover width.
What to confirm before ordering
| Buyer input | Scope to confirm |
|---|---|
| Deck drawing and revision | Rib depth, pitch, edge geometry and effective cover width. |
| Material and coil | Steel grade, coating, thickness range and incoming coil width. |
| Additional features | Whether embossing, punching or other operations are specified and included. |
| Production duty | Cut lengths, target accepted output, handling and changeover needs. |
| Acceptance | Identified trial material, measured samples, deviations and agreed repeatability checks. |
What should a floor deck machine quotation include?
Direct answer: An itemized equipment scope tied to one deck drawing. Our factory engineers in Xiamen review the rib geometry, effective cover, steel grade and thickness, cut lengths, embossing or punching and target output, and we issue a written, project-specific quotation. For the configuration levels and price factors, see how much a floor deck roll forming machine costs.
Ask each supplier to separate the forming line and tooling from the decoiler, cut-off system, run-out or stacking equipment, guarding, spare tooling, commissioning and training. Mark every item as included, optional or excluded. Keep freight, import charges and site preparation separate, and record the quotation currency, validity and delivery basis. A lower headline total may cover a different machine or fewer services.
Compare the same drawing revision, material and acceptance trial across offers. Use the quotation-scope guide and buyer worksheet to record inclusions, then check the floor deck sample acceptance guide.
Production-base reference: YX ribbed deck line
The YX floor-deck model page lists the configuration below. These are our Xiamen production base's published reference figures for its named example, checked on 28 September 2026. Your own line is specified in the quotation against your drawing, material and options.
| Published YX reference | Production-base listing | What the buyer must verify |
|---|---|---|
| Profile and coil width | 620 mm effective cover width (listed tolerance ±5 mm) from 1000 mm feed width | Approved rib and lap drawing, measured assembled cover width and permitted deviations. |
| Material | Galvanized sheet, 0.8–1.2 mm thickness range | Required steel grade, coating, actual thickness tolerance and trial coil identity. |
| Forming and drive | 24 forming stages; two 11 kW drive motors and 5.5 kW hydraulic power | Quoted roller, motor, hydraulic and electrical configuration for the approved profile. |
| Listed line speed | Up to approximately 20 m/min | Speed under the agreed trial material and operations; accepted sheets per shift after cutting and handling. |
Review a trial sample, not a catalogue speed
We demonstrate the proposed line with representative material at our Xiamen factory. Measure the first acceptable sheet against the drawing, then check additional identified samples under the agreed production sequence. Record punching or embossing features only when they are part of your ordered profile. Structural or fire performance of the completed building system needs separate project evidence.
For a detailed measurement record, read how to accept floor deck trial samples. If the purchase schedule distinguishes open-rib and re-entrant sections, use the floor-deck profile and tooling guide before assuming one set of rolls covers both. Send the drawing and material details through the configuration review form.
Send your floor deck drawing
Our factory engineers in Xiamen review your profile and production process, then we confirm the proposed configuration and quotation.
Request configuration reviewHow much does a floor deck roll forming machine cost?
Direct answer: We quote every floor deck roll forming machine by configuration, not from a fixed price list. The price depends on the profile drawing, material thickness, punching and cutting, the level of automation and the delivery terms. Send your drawing and we reply with a written quotation for that exact configuration.
| Configuration level | What changes | Usually chosen for |
|---|---|---|
| Single-profile deck line | One deck profile with post-cutting and manual run-out. | One standard deck profile |
| Multi-profile line | More than one deck profile through exchangeable tooling. | Producers who supply two or more deck profiles |
| Automatic line with stacking | Automatic cut-to-length, run-out and stacking for higher daily volume. | Continuous production for distributors and contractors |
Price rises from the first level to the third as tooling, servo control and automation are added.
What affects the price
- Deck profile: depth, rib pitch and cover width
- Steel thickness and yield strength
- Embossing and end closure requirements
- Cutting method and maximum sheet length
- Composite or non-composite deck
- Control system and main component brands (PLC, servo, hydraulics)
- Decoiler, outfeed table and automatic stacking
- Delivery terms (FOB or CIF), packing and spare parts
Roll forming machines from Halcyon's Xiamen factory have been used on 150+ construction projects (2022–2026) in China and abroad, including an airport in Iraq, a national stadium in Senegal, resort buildings in the Maldives and a coal preparation plant in Mongolia. See the reference projects.
Check deck coverage and embossing on trial sheets
Send us the approved deck drawing, steel grade, coating, thickness range, coil width, specified embossing or punching, finished lengths and target accepted output. Identify the trial coil and retain first-off and later sheets. Measure rib depth, pitch and effective cover width at agreed datums; place two sheets in the specified lap direction to check fit.
Is the overall sheet width the installed cover width?
No. Installed cover depends on the specified side lap. Compare the assembled trial pair with the project drawing, not a single flat sheet alone.
Does an embossed sample establish composite-floor performance?
No. Record whether the proposed machine forms the specified embossing and sheet geometry. Structural composite action, fire rating and installation design require separate engineering evidence.
Is a structural floor framing member the same as a ribbed floor deck sheet?
No. This page is for ribbed deck sheets and their effective cover width. For a floor framing member with service holes and fixing features, review the HLG-300 structural floor framing reference against the actual member drawing.
What should be agreed before a machine trial?
Agree the drawing revision, material and coil, measurement method, sample interval, allowed deviations, cut lengths and handling sequence. Record any rejected or adjusted samples rather than only the best sheet.
Source and scope: Halcyon Machinery buyer-review framework, updated 6 October 2026. Compare our Xiamen production base's ribbed floor-deck sheet example and HLG-300 structural floor-member example for the different profile applications. Updated 6 October 2026 · Halcyon Machinery, Xiamen.