Window Frame Roll Forming Machine

Start from the approved window frame section, glazing detail and hardware layout.

Can a steel window frame be specified from a door-frame catalogue?

Direct answer: No. The glazing rebate, seal groove, drainage, fixing and corner joint may differ from a door jamb. Provide the actual frame and sash drawings. Have our factory team identify which rolls and stations, if any, are shared, then check measured trial sections and an assembled corner.

Sectionframe and sash drawings, glazing rebate, seals and tolerances
Materialgrade, coating, thickness range and coil width
Openingsfixings, drainage, hardware and cut-length schedule
Jointcorner connection and any separate welding or assembly operation
Trialmeasure sections and fit a corner with glazing and seal samples

What does the production-base reference establish?

our Xiamen production base's published door-and-window-frame line describes decoiling, leveling, pre-punching, roll forming, straightening, notch punching, cutting and unloading. Its detailed examples and dimensions are mainly for door frames. The listing alone does not verify tooling for your specific window frame, sash, glazing rebate, drainage or corner joint. Treat it as a process reference; request a written proposal against your approved window drawings and measured trial parts before confirming a configuration.

What cannot be inferred from the frame shape?

Thermal, water, air and structural performance belong to the full window system and its relevant test evidence. A visible metal profile or machine trial does not prove a thermal break or system rating. A door-frame line is not automatically compatible; ask for a separate tooling review. See the door-frame scope for the related but distinct process.

Does this steel roll former produce extruded aluminium window profiles?

This page covers cold roll forming of steel window sections from coil. Aluminium frame and sash profiles made by extrusion use a different process: a heated billet passes through a die. This steel roll former is neither an extrusion press nor a machining line for extruded profiles. For a proposed aluminium sheet-from-coil section, send the alloy, temper, thickness, finish and section drawings. A suitable configuration and trial must be confirmed separately; this page does not establish that capability.

Read the aluminium extrusion process explanation from the Spanish Aluminium Association

Send us your section drawing

Send separate frame and sash drawings, glazing and seal details, material, slots, cut schedule and target output. We will ask our factory team to review the exact tooling and trial scope.

Get a quote

Check the complete frame-and-sash interface

Supply separate approved drawings for the frame and sash, together with glazing, seal, drainage and hardware details. Ask our factory team to state exactly which sections and cut or punching operations are included. Measure trial lengths and mating faces, then assemble a corner with the intended connector, glazing and seal samples.

Can a door-jamb roll set make the window frame?

Do not assume it can. Compare each rebate, groove, flange, fixing and corner detail, and request a documented tooling review for any proposed shared platform.

Does a metal frame sample prove a window rating?

No. Air, water, thermal and structural ratings relate to the complete window system and require the applicable design and tests. A roll-forming trial checks the specified metal sections.

What belongs in the inquiry package?

Include frame and sash drawings, material grade, coating, thickness range, coil width, holes or drainage slots, cut schedule, target output and the planned joining process.

Sources and limits: production-base equipment listing and Halcyon Machinery buyer-review framework, reviewed 2 October 2026. The picture is a forming-equipment reference, not evidence of a tested window-system configuration. Supplier catalogue specifications are not a quotation or proof that a particular window section is supported.